Troubleshooting - Polaroid PDM-2727M User Manual

Troubleshooting

Take steps described in the tables below to solve simple problems before contacting
after-sales service.
If You Suspect Something Wrong, immediately turn the power off.
Disconnect the power connector and check that there is neither smoke nor heat from the unit
before asking for repairs. Never try to repair the unit by yourself because it is dangerous to do
so.
PROBLEM
The player cannot
play.
There is no sound
POSSIBLE CAUSE POSSIBLE SOLUTION
The disc cover may not be Close the disc cover.
closed.
There may not be any discs Put a disc in to the DVD drive.
in the DVD drive.
The disc may not be put in Put the disc in with the label
with the right way. side up.
The disc may be dirty or Clean or change the disc.
warped.
Make
The player's region code
region code is the same as
may not as the same as the
the region code of DVD
region code of DVD disc.
disc.
There may be water on the Remove the disc and keep
lens. the player being powered off
for at least two hours.
The system connection may
Connect
be not correct. correctly.
The speaker may not be
Turn on the speaker.
turned on.
The sound setup of the DVD Setup the sound of the DVD
correctly.
disc may be not correct.
The disc may be dirty or
Clean or change the disc.
warped.
35
sure the player's
the system