Franklin R910 User Manual page 25

▪
Multi SSID Isolation: If On is selected, it will prevent your device from communicating
across the Main and Guest Wi-Fi's.
▪
Allow Guest Wi-Fi users to access the web interface: If the box is checked, users on the
Guest Wi-Fi also can access the Web User Interface.
▪
Wi-Fi Name: Service Set Identifier (SSID). To change it, enter a string less than 32
characters as the name for your wireless local area network (WLAN).
▪
Wi-Fi Password: To change, enter the new Wi-Fi password. The password needs to be at
least 8 characters long.
▪
Wi-Fi Band: If 5G is selected, Wi-Fi will use 5G band.
▪
Privacy Separator: If ON is selected, your devices on the same Wi-Fi Name can't make
Local Area Network communication. (Note: if you connect WLAN printer to your R910,
Privacy Separator should be OFF to send file from your PC to the printer.)
▪
SSID Stealth: If OFF is selected, the Wi-Fi name will not appear in the list of available
networks. You need to manually enter Wi-Fi name and connect.
▪
Authentication Method: Use this setting to select the desired type of Wi-Fi security used to
encrypt the wireless network. WPA2 is the latest and most secure method and should be
used whenever possible.
Mode
Open
SHARED
WPA2-PSK
Description
Authentication and encryption won't be performed. There
are risks that private info will be intercepted or network
will be used by unauthorized individuals
Authentication via Shared Key protocol
WPA2-PSK is the securer version of WPA with
21