Switching Registration Banks; Storing A Registration; Selecting Drum Sounds - Roland VR-09 Owner's Manual

Switching Registration Banks

Switching banks (Banks 1–4)
1.
Press the [BANK] button .
The BANK screen is shown in the display.
2.
Press the [1]–[4] buttons to select the desired bank .
3.
Press the [1]–[4] buttons to select a registration .
You'll switch to a registration of the bank you selected.
Switching banks (Banks 5–25)
1.
Press the [BANK] button .
The BANK screen is shown in the display.
2.
Turn the [VALUE] dial to select the desired bank .
3.
Press the [ENTER] button .
4.
Press the [1]–[4] buttons to select a registration .
You'll switch to a registration of the bank you selected.

Storing a Registration

1.
Select the desired sounds and effect settings .
2.
Hold down one of the [1]–[4] buttons until the following
screen appears .
3.
Select the store-destination .
Use the CURSOR [ ] [ ] buttons and the [VALUE] dial to select the
store-destination bank and registration number.
4.
Specify a name for the registration .
Button/Dial Operation
CURSOR [ ] [ ]
Select the character that you want to change.
buttons
[VALUE] dial Changes the character.
MODE [ORGAN] (Del)
Delete the character.
button
MODE [PIANO] (Space)
Inserts a space.
button
5.
Press the [ENTER] button or the MODE [SYNTH] (Write)
button .
Your settings will be stored in the selected registration.
REFERENCE
About the settings stored in a registration, refer to "Reference
Manual" (PDF).
Currently selected bank number

Selecting Drum Sounds

You can play drum sounds and sound effects from this unit's
keyboard.
A drum kit lets you choose from a selection of sounds.
When you switch drum kits, the sounds assigned to each key will
change.
REFERENCE
Refer to "Drum Kit List" in the "Data List" (PDF) for details on the
percussion instrument sounds that are assigned to each key.
You can download the "Data List" (PDF) from the Roland website.
http://www.roland.com/manuals/
1.
Press the [DRUM] button to make it light .
The DRUM screen appears.
2.
Turn the [VALUE] dial to select a drum kit .
Drum kit
Multi-effect type ( & PDF)
MEMO
• By using the looper function (p. 26) to overdub-record drum
sounds, you can create rhythm patterns using these sounds.
• You can play the keyboard to audition the sound at which the
cursor is located.
• If you press the [TRANSPOSE] button while the DRUM screen is
shown, the DRUM screen will be held. Press the [EXIT] button to
return to the previous screen.
• You can use the DRUM LEVEL [ ] [ ] buttons to adjust the
volume of the drum kit (p. 22).
Selecting Sounds
Volume
(DRUM LEVEL [ ] [ ] button)
Octave (p . 17)
11