At this time the hour of the clock will flash, which means the current setting is the hour of Timer 1 "On",
press the "▲" or "▼" to adjust, press " " key when finished, and then the minute of the clock will
flash, which means the current setting is the minute of Timer 1 "On" , press the "▲" or " ▼ " to adjust,
press "
" key when finished, the LCD will display as the following:
At this time the hour of the clock will flash, which means the current setting is the hour of Timer 1 "Off",
press the "▲" or "▼" to adjust, press "
flash, which means the current setting is the minute of Timing 1 "Off" , press the "▲" or "▼" to adjust,
press "
" key when finished, the LCD will display as the following:
At this time the hour of the clock will flash, it means the current setting is the hour of the Timer 2 "On".
And the follow setting method will be the same as the Timer 1. Similarly, the setting of Timing 3 is the
same as this method. After setting is finished, press "OK" key or wait for 7 seconds to confirm the setting,
and the LCD will display the effective timing information, as the following display:
RUN
WATER
TEMP.
TIMER
ON
MODE
Press
twice
FUNCTIONS
(Press for 3sec to
cancel timer)
TIMER
1
OFF
" key when finished, and then the minute of the clock will
TIMER
ON
TIMER
56
(Press for 3sec to
unlock)