Control Panel - Neo-Neon SRM-25007 User Manual

ELC 250WATT MINI NEO-ONE
Neo-Neon International
C
ONTROL PANEL
The control panel is used to set control modes, address, and
personalities; to display information readouts, to run tests, and to
control the fixture manually.
TO NAVIGATE THE CONTROL MENU
Error messages, if any and mode information are displayed at the top of
the menu tree. If the fixture is in (1) DMX mode, the address is
displayed; (2) Automatic Stand-alone mode,
of the menu can be reached by pressing [menu] repeatedly.
1. From the top of the control menu, press [menu] to enter the
main menu.
2. Press [up] or [down] to scroll through menus and press
[enter] to view submenus.
3.
To activate a setting or function, press [enter].
4.
To return to the previous menu or to escape without
making a selection, press [menu].
PERSONALITIES
The following settings are available to modify fixture behavior.
Pan/tilt swap: Map pan to the tilt channel and tilt to the pan channel to provide
more intuitive control of fixtures mounted sideways.
Inverse pan: Flip pan movement to right-to-left instead of left-to-right.
Inverse tilt: Flip tilt movement to down-to-up instead of up-to-down.
DMX lamp-off: By switching the fixture between 6 and 7 channels, you are able to strike the lamp via
DMX.
Display: Flip the display for truss mounting.
8
All rights reserved. No part of this manual may be reproduced, in any form,
Without the express permission, in writing from Neo – Neon LTD GUANGDONG,
4
USER INTERFACE PICTURE / DIAGRAM
SA is displayed. The top
©
Neo Neon LTD, GuangDong china
China
Printed in China 2006