Table of Contents
Advertisement
ELC 250WATT MINI NEO-ONE
Neo-Neon International
To install the main fuse
Fuses are provided for 100 - 130 V and 200 - 250 V operation.
Use only the fuse specified for the operating voltage.
1.
Locate the bag containing the fuse for your AC voltage.
Insert the fuse in the fuse holder. The holder may be
packed with the other fuse.
2.
Remove the label covering the mains input socket.
3.
Insert the fuse holder in the empty slot in the mains input
socket (C).
To install a plug on the power cable
The power cable must be fitted with a grounding-type cord cap that fits
your power distribution system. Consult an electrician if you have any
doubts about proper installation.
Following the cord cap manufacturer's instructions, connect the yellow
and green wire to ground (earth), the brown wire to live, and the blue wire
to neutral. The table below shows some pin identification schemes.
Table 1: Cord cap connections
Wire
Pin
brown
live
blue
neutral
yellow/green
ground
To apply power
Warning! The power cables must be undamaged and rated for the electrical requirements of
all connected devices. Important! Powering through a dimmer system can damage the
fixture.
•
Connect the prepared cable to the mains input socket and the AC mains distribution system. Do
not connect the fixture to a dimmer system.
5
All rights reserved. No part of this manual may be reproduced, in any form,
Without the express permission, in writing from Neo – Neon LTD GUANGDONG,
Marking
"L"
"N"
©
Neo Neon LTD, GuangDong china
China
Screw color
yellow or brass
silver
green
Printed in China 2006
Advertisement
Table of Contents
