If you have questions about how to operate the fixture safely, please contact your Neo-Neon dealer or call CHINA (+86) 13929029266 To protect yourself and others from electric shock •...
The exterior of the fixture can reach temperatures up to 60° C (140° F). Allow the fixture to cool before handling. • Do not modify the fixture or install other than genuine Neo-Neon parts. • Do not operate the fixture if the ambient temperature (Ta) exceeds 40°...
ELC 250WATT MINI NEO-ONE Neo-Neon International • Block access below the work area whenever installing or removing the fixture. UNPACKING The packing material is carefully designed to protect the fixture during shipment - always use it to transport the fixture.
ELC 250WATT MINI NEO-ONE Neo-Neon International To install the main fuse Fuses are provided for 100 - 130 V and 200 - 250 V operation. Use only the fuse specified for the operating voltage. Locate the bag containing the fuse for your AC voltage.
ELC 250WATT MINI NEO-ONE Neo-Neon International NSTALLATION LOCAT ION AND ORIENTATION For safe operation, install the Neo One Mini in a location where: - • It is at least 0.3 meters (12 inches) away from illuminated surfaces and combustible materials.
Page 7
ELC 250WATT MINI NEO-ONE Neo-Neon International fully clockwise. Attached the safety cable that can bare at least 10 times its weight, through the safety cable anchor point at the base. Block access below the work area. Working from a stable platform, clamp the fixture to the structure.
ELC 250WATT MINI NEO-ONE Neo-Neon International ONTROL PANEL The control panel is used to set control modes, address, and personalities; to display information readouts, to run tests, and to control the fixture manually. USER INTERFACE PICTURE / DIAGRAM TO NAVIGATE THE CONTROL MENU Error messages, if any and mode information are displayed at the top of the menu tree.
ELC 250WATT MINI NEO-ONE Neo-Neon International MENU FUNCTIONS AND DISTRIBUTION The Mini Neo-One has 9 menu functions. Bellow is a Menu tree, which will help you to read understand the menu codes. ADDR MODE rPAN rTILT r-PT nchn TEST DSPL...
ELC 250WATT MINI NEO-ONE Neo-Neon International r-PT This allows you to change the pan and tilt direction simultaneously: - REVERSE STND STANDARD nchn This allows you to control the ELC lamp via DMX: - lamp controlled via DMX lamp controlled via fixture...
Page 11
ELC 250WATT MINI NEO-ONE Neo-Neon International CHANNEL 4 – COLOR DMX VALUE EFFECT 0 -15 OPEN 16 -31 COLOR 1 32 -43 COLOR 2 44 -55 COLOR 3 56 -67 COLOR 4 68 -79 COLOR 5 80 -91 COLOR 6...
ELC 250WATT MINI NEO-ONE Neo-Neon International Optical Path Configuration GOBO WHEEL This fixture has 7 static indexing metal gobos plus one open. The gobos can be chosen prior to manufacture. Wheels can be interchanged with replacement wheels to vary the gobo effects.
ELC 250WATT MINI NEO-ONE Neo-Neon International Trouble Shooting PROBLEM REASON TROUBLE SHOOTING No Power Turn on the power at mains One or More DMX ADDRESS Ensure you are sending signal fixtures do not to the fixture respond Fuse Check that the fuse is in...