Extending The Battery Life; Powering Your Phone On/Off; Setting Up Your Phone For The First Time - Zte BLADE X User Manual

Warnings!
• Use only ZTE-approved chargers and USB Type-C™ cables. The use of
unapproved accessories could damage your phone or cause the battery
to explode.
• Do not remove the back cover. The battery is not removable. Removal may
cause fire or explosion.
Note: Use the USB Type-C charger that comes in-box with your phone
to charge the battery. It's specially built to support Qualcomm
Charge™ 1.0.
1. Connect the adapter to the charging/USB Type-C port.
2. Connect the charger to a standard AC wall outlet.
If the phone is on, you'll see a charging icon, such
as or , appear in the Status Bar.
3. Disconnect the charger when the battery is fully charged.
Note: If the battery is extremely low, you may be unable to power on the
phone even when it is being charged. In this case, try again after charging
the phone for at least 20 minutes. Contact customer service if you still cannot
power on the phone after prolonged charging.
This device contains a nonremovable battery. Attempting to remove will
void your warranty and could cause serious injury. Do not damage, alter,
or try to remove the battery.
10

Extending the battery life

Active applications, screen brightness levels, Bluetooth and Wi-Fi usage, and
GPS functionality can drain your battery. You can follow the helpful tips below
to conserve your battery power:
• Reduce the screen backlight time.
• Lower the screen brightness.
• Turn auto-sync, Wi-Fi, and Bluetooth off when not in use.
Quick
®
• Disable the GPS function when not in use. Most applications using this
function will periodically query the GPS satellites for your current location;
each query drains your battery.

Powering your phone on/off

• Press and hold the Power key to turn on your phone.
• To turn it off, press and hold the Power key to open the options menu.
Tap Power off.
Note: If the phone freezes or takes too long to respond, press and hold the
Power key for about 10 seconds to restart the phone.

Setting up your phone for the first time

When you first power on your phone after you purchase it or reset it to factory
settings (see Settings – Personal – Backup & reset), you will need to set it up
before using it.
1. Tap the language field to select the language you want, and tap LET'S GO.
2. Follow the prompts to set up your Wi-Fi connection, Google services, name,
device protection, and other options.
Note: Users with low vision can tap Vision Settings on the initial setup screen
to customize accessibility features.
GETTING STARTED GETTING STARTED 11