Table of Contents
Advertisement
Getting Started
NOTE: Use the USB Type-C™ charger that comes in-box with your phone to charge the
battery. It's specially built to support Qualcomm® Quick Charge™ 2.0.
1. Connect the adapter to the charging port.
2. Connect the charger to a standard AC wall outlet. If the phone is on, you'll see a
charging icon, such as
or , appear in the Status Bar.
3. Disconnect the charger when the battery is fully charged.
NOTE: If the battery is extremely low, you may be unable to power on the phone even when
it is being charged. In this case, try again after charging the phone for at least 20 minutes.
Contact customer service if you still cannot power on the phone after prolonged charging.
This device contains a nonremovable battery. Attempting to remove will void
your warranty and could cause serious injury. Do not damage, alter, or try to
remove the battery.
Extending the Battery Life
Active applications, screen brightness levels, Bluetooth and Wi-Fi usage, and GPS
functionality can drain your battery. You can follow the helpful tips below to conserve
your battery power:
• Reduce the screen backlight time.
• Lower the screen brightness.
• Turn auto-sync, Wi-Fi, and Bluetooth off when not in use.
• Disable the GPS function when not in use. Most applications using this function
will periodically query the GPS satellites for your current location; each query drains
your battery.
Powering Your Phone On/Off
• Press and hold the Power/Lock Key to turn on your phone.
6
• To turn it off, press and hold the Power/Lock Key to open the options menu. Tap
Power off > OK.
NOTE: If the phone freezes or takes too long to respond, press and hold the Power/Lock
Key for about 10 seconds to restart the phone.
Setting Up Your Phone for the First Time
When you first power on your phone after you purchase it or reset it to factory settings
(see Settings – Device – Backup & Reset), you will need to set it up before using it. Select
the language and then follow the prompts to set up your phone.
Locking/Unlocking the Screen and Keys
Your phone allows you to quickly lock the screen and keys (put the phone into Sleep mode)
when not in use and also to turn the screen back on and unlock it when you need it.
Locking the Screen and Keys
To quickly turn the screen off and lock the keys, press the Power/Lock Key.
NOTE: To save battery power, the phone automatically turns off the screen after a certain
period of time when you leave it idle. You will still be able to receive messages and calls
while the phone screen is off.
Unlocking the Screen and Keys
1. Press the Power/Lock Key to turn the screen on.
2. Press and hold a blank area of the screen to unlock the phone, press and hold
the bottom right to open the Camera app, or press and hold
Google voice commands. You can also double-tap a notification to open the related app.
NOTE: If you have set a fingerprint, an unlock pattern, a PIN, or a password for your
phone (see Personalizing – Protecting Your Phone With Screen Locks or Using Your
Fingerprint), you'll need to press your finger against the sensor, draw the pattern, or enter
the PIN/password to unlock your screen.
Getting Started
at
at the bottom left to use
7
Advertisement
Table of Contents
