Table of Contents
Advertisement
3.19 Paging/Finding a handset
Press FIND on the base. All handsets registered to
the base will ring.
To stop the paging, press FIND again, or press any
key on the handset, or place the handset on the base.
Help
4. Help
The
icon is not scrolling when the handset is
placed on the base
•
Handset not properly seated on the base cradle
-readjust the handset on the base.
•
Dirty contact - clean the charge contacts by wiping
with an alcohol moistened cloth.
•
Battery is full - charging is not necessary at this
time.
No dial tone
•
If there is no base power, check the connections.
Reset the phone by unplugging then plugging it
back into an electrical outlet.
•
If the handset batteries are empty, recharge the
battery pack for at least 24 hours.
•
Move the handset closer to the base.
•
Be sure to use only the provided telephone cords.
35
Advertisement
Table of Contents
