Ssid Tab - Cisco aironet 1810 series User Manual

Chapter 2 Understanding the Access Point GUI

SSID Tab

The Configuration SSID tab (see
SSIDs, for the 2.4 GHz and the 5 GHz radio interface.
The Personal Network section allows the user to configure the following:
•
•
•
The MAC Filter section allows for MAC filtering. Check the Enabled check box to enable MAC
filtering. Specify the MAC addresses that are to be allowed wireless access, in the table provided.
The Security Section allows the user to configure security parameters for the selected SSID and radio
interface. The following authenticated key management parameters can be configured:
•
•
•
•
Enabled—Check this check box to set a personal SSID on this radio.
Broadcast—Check this check to broadcast the personal SSID on this radio.
SSID—Specify the personal SSID, which will be the network's name.
WPA-PSK—Enable/disable WPA-PSK security.
WPA2/PSK—Enable/disable WPA2-PSK security. If you enable this, ensure that the client is
configured for WPA2/PSK and AES encryption.
WPA Encryption—The WPA data encryption algorithm is set to AES.
WPA Passphrase—Enter a passphrase having 8 to 32 ASCII characters. The passphrase is
case-sensitive.
Figure 2-5) contains fields necessary for you to configure your personal
Cisco Aironet 1810 Series OfficeExtend Access Point User Guide
Configuration Page
2-7