HTC ONE Quick Start Manual

Getting to Know Your Phone
Quick Start
microSIM
card slot
NFC
For more information, visit att.com/DeviceSupport
Headphone
Power
jack
Notifications
Notification
bar
LED
Front
camera
Volume
up
Dual
speakers
Volume
down
Touch
screen
Back Home
Charger/
USB port
Setting up Your Phone
Insert the microSIM card Charge the phone
1 To eject the microSIM card tray, 1 Connect the USB cable to your
insert a small bent paperclip or phone.
the microSIM eject pin into the
small hole next to the tray.
2 Plug in the power adapter to
an electrical outlet to start
2 Pull the microSIM card tray out,
charging.
and place the microSIM card into
the tray.
Important: Please use the power
adapter and USB cable that came
in the box for optimum battery
performance.
3 Insert the microSIM card tray
into its slot.
Phone Basics
Get started
Press and hold the power button on the top panel to
turn the phone on or off.
To lock, briefly press the power button.
To unlock, press the power button, then pull the
lock up.
Ready2Go
AT&T Ready2Go helps you set up your device using
your computer.
Set up email, contacts, and Wi-Fi.
•
Customize your home screen, wallpaper,
•
ringtones, and more.
When you first turn on the phone, you'll see the
AT&T Ready2Go wizard.
1 Tap Get Started. You'll see a web address and code.
2 On your computer's browser, go to the web page.
3 Enter the code from your phone on the web page.
4 Complete the steps to send your personalization
options to your phone.