Spark Plugs; Spark Plug Inspection; Spark Plug Recommendations - Polaris MV700 Owner's Manual For Maintenance And Safety

MAINTENANCE

Spark Plugs

Spark Plug Recommendations

CAUTION
Using non-recommended spark plugs can result in serious engine
damage. Always use Polaris-recommended spark plugs.
Refer to the specifications section beginning on page 112 for the
recommended spark plug type and gap for your vehicle.
Plug Condition
New Spark Plug
Previously Installed Spark Plug

Spark Plug Inspection

Spark plug condition is indicative of engine operation. The spark plug
firing end condition should be read after the engine has been warmed
up and the vehicle has been driven at higher speeds. Immediately
check the spark plug for correct color. See page 91.
WARNING
A hot exhaust system and engine can cause serious burns. Wear
protective gloves when removing a spark plug for inspection.
1. Remove the spark plug cap.
2. Using the special wrench provided in the tool pouch, rotate the
spark plug counterclockwise to remove it.
3. Reverse the procedure for spark plug installation, using the
recommended spark plug. Torque to specification.
90
Spark Plug Torque Specification
Torque
9-11 ft. lbs. (12-15 Nm)
17-20 ft. lbs. (23-27 Nm)