Oil Check - Polaris MV700 Owner's Manual For Maintenance And Safety

MAINTENANCE

Oil Check

The dipstick/oil fill (1) is located on the engine on the left side of the
ATV. Do not start the engine before the oil check.
NOTE: A rising oil level between checks in cool weather driving can
indicate contaminants such as gas or moisture collecting in
the crankcase. If the oil level is over the full/safe mark,
change the oil immediately.
1. Position the vehicle on a level surface.
2. Remove the dipstick and wipe it dry
with a clean cloth.
NOTE: Lift the lever lock (2) to remove
the dipstick.
3. Reinstall the dipstick completely, but
do not lock it. The dipstick must be
completely seated.
4. Remove the dipstick
and check the oil level.
Maintain the oil level
between the SAFE
and ADD marks (3).
Do not overfill.
NOTE: Due to the dipstick
entry angle into the
crankcase, the oil level
will read higher on the
bottom side of the dipstick.
Always read the level on
the upper surface (4) of
the dipstick.
5. After reinstalling the dipstick,
seat the lever lock.
70
1
2
SAFE
ADD 8 OZ
3
4