Throttle Cable Freeplay - Polaris MV700 Owner's Manual For Maintenance And Safety

Throttle Cable Freeplay

Adjust throttle cable freeplay at the handlebar.
1. Locate the throttle cable adjuster at
the handlebar.
2. Squeeze the end of the rubber boot
and slide it far enough to expose the
end of the inline cable adjuster.
3. Loosen the adjuster lock nut.
4. Rotate the boot to turn the adjuster
until 1/16" to 1/8" (1.5- -3 mm) of
freeplay is achieved at the thumb
lever.
NOTE: While adjusting freeplay, be
sure to flip the throttle lever
back and forth.
5. Tighten the lock nut.
6. Squeeze the end of the rubber boot
and slide it over the cable adjuster to
its original position.
Accessories
Auxiliary power outlets provide 12V power for operating accessories
such as hand held spot lights. See your Polaris dealer.
MAINTENANCE
1
3
2
103