Features; Engaging Front Gearcase - Polaris 9919412 Owner's Manual For Maintenance And Safety

All Wheel Drive (AWD) System
Polaris 4-wheel drive ATVs are
equipped with a unique,
Polaris-exclusive, All Wheel Drive
(AWD) system, which is activated
by a switch (1) on the right
handlebar. When the switch is off,
the ATV is in 2 wheel drive at all
times. When the switch is on, the
ATV is in AWD and the AWD
indicator light in the instrument
cluster will be on.
When in AWD, the front gearcase will automatically engage any time
the rear wheels lose traction. When the rear wheels regain traction, the
front gearcase will automatically disengage.
NOTE: The override switch allows activation of AWD in reverse if the
AWD switch is on. See page 33.
There is no limit to the length of time the vehicle may remain in AWD.

Engaging Front Gearcase

The AWD switch may be turned on or off while the vehicle is moving.
Initially, the vehicle's electronic system will not enable the AWD until
the engine RPM is below 3100. Once enabled, the AWD remains
enabled until the AWD switch is turned off. If the switch is turned off
while the front gearcase is moving, it will not disengage until the rear
wheels regain traction.
Engage the AWD switch before getting into conditions where front
wheel drive may be needed. If the rear wheels are spinning, release the
throttle before switching to AWD.
CAUTION
Switching to AWD while the rear wheels are spinning may cause
severe drive shaft and gearcase damage. Always switch to AWD
while the rear wheels have traction or are at rest.

FEATURES

1
41