LYNX™
Symbology Character
Substitution
Character Substitution
34
DATA FORMAT
1.
Select a Datalogic Standard Code Identifier
from the Code Identifier Table in Appendix
A.
2.
Read the corresponding character as Hex
value from the Hex/Numeric table which
identifies the character to be substituted.
Valid value is in the range 00-7F.
3.
Read the corresponding character as Hex
value from the Hex/Numeric table which
identifies the new substituting character.
Valid value is in the range 00-7F.
4.
Read the following code to enable the
configuration you have set.
1.
Select a Datalogic Standard Code Identifier
from the Code Identifier Table in Appendix
A.
2.
0 = disabled
1 = enabled
DATALOGIC