Symbology Headers; Headers - Datalogic lynx Instruction Manual

LYNX™

Symbology Headers

Headers

32
DATA FORMAT
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in Appendix
A.
2. Set the number of characters in the range
0-5.
3. Read the corresponding characters as Hex
values from the Hex/Numeric table. Valid
values are in the range:
00-7F for RS232
00-9B for Wedge
4. Read the following code to enable the
configuration you have set.
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in Appendix
A.
2. 0 = disabled
1 = enabled
DATALOGIC