Using The Web Interface - Parrot Zikmu Solo Quick Start Manual

not create its own Wi-Fi network. To do so, you first need to reset the Parrot Zikmu
Solo Wi-Fi parameters by holding down the
1. On your computer, scan for available Wi-Fi netw orks.
2. Join the "SoloNet-xx.xx" Wi-Fi netw ork (as if you w ere trying to establish a
connection w ith a router / modem).
Note : You will temporarily lose your Internet access. You can reconnect your
computer to your Wi-Fi network at the end of this procedure.
3. Launch your w eb brow ser on your computer or Smartphone and enter
http://zikmu-solo.local (or http://[new -name].local if you changed the
speaker name) in the address bar.
4. Click on
Wi-Fi
> The list of available Wi-Fi netw orks is displayed.
5. Select your Wi-Fi netw ork.
6. Enter the WEP / WPA / WPA2 if necessary then click on Apply.

Using the web interface

The Parrot Zikmu Solo w eb interface allow s you to control the playback of your
audio files and modify several audio settings. You can access this interface
from your computer, Smartphone or tablet.
Configuration.
button for 2 seconds.
English 19