Seat Removal - Polaris 500 Owner's Manual For Maintenance And Safety

FEATURES AND CONTROLS

Seat Removal

Pull up on the front of the
seat and slide it toward the
front of the vehicle.
Install the seat by sliding the
tabs into the rear of the seat
base. Push down firmly on
the front of the seat until the
pins are fully seated into the
grommets.
Fuel Cap/Fuel Gauge
The fuel tank filler cap is located on
the right-hand side of the vehicle near
the passenger seat. It has a built-in fuel
gauge that indicates the amount of fuel
remaining in the tank.
When the indicator needle nears the
empty mark, refuel at the earliest
opportunity.
Fuel
When refueling, always use either
Cap
leaded or unleaded gasoline with a
minimum pump octane number of 87
R+ M/2 octane. Do not use E-85 fuel.
26