Battery Maintenance - Polaris 500 Owner's Manual For Maintenance And Safety

MAINTENANCE
Cleaning and Storage
Storage Tips
Fog the Engine
1. Remove the spark plug and add 2-3 tablespoons of Premium 4 Syn-
thetic 0W40 engine oil.
2. Reinstall the spark plug. Torque to specification. See page 67.
3. Apply dielectric grease to the inside of the spark plug cap. Reinstall
the cap.
4. Turn the engine over several times. Oil will be forced in and around
the piston rings and ring lands, coating the cylinder with a protec-
tive film of fresh oil.
5. Treat the fuel system with Polaris Carbon Clean. See page 99. If
Polaris fuel system additive is not used, fuel tank, fuel lines, and
carburetor should be completely drained of gasoline.
6. To eliminate any fuel remaining in the carburetor, run the engine
until it stops.

Battery Maintenance

See pages 93-95 for storage and charging procedures.
Storage Area/Covers
Be sure the storage area is well ventilated. Cover the vehicle with a gen-
uine Polaris cover.
NOTE:
Do not use plastic or coated materials. They do not allow enough ven-
tilation to prevent condensation, and may promote corrosion and oxi-
dation.
100