Setting Of Functions Of Sc-921 - JUKI SC-921 Instruction Manual

Discrete control box
Hide thumbs Also See for SC-921:
Table of Contents

Advertisement

6. Setting of functions of SC-921

Functions can be selected and specified.
(Caution) For the function setting procedure of any operation panel other than CP-18, refer to the In-
struction Manual for the operation panel to be used.
* The content of setting of the setting No. returns to the initial value by pressing
switch ❻ simultaneously.
3) After completion of the changing procedure, press
dated value.
(Caution) If the power is turned OFF before carrying out this procedure, the changed content is not
updated. When
switch ❹ is pressed, the display on the panel changes to the subsequent setting
No. When
No. After completion of the operation, the machine is returned to the normal sewing state by turn-
ing OFF the power and re-turning it ON.
switch ❸ is pressed, the display on the panel changes to the previous setting
– 23 –
1) Turn ON the power with
switch ❼ held pressed.
(The item which has been changed
during the previous work is dis-
played.)
*
If the screen display does not
change, re-carry out operation de-
scribed in step 1).
(Caution) Be sure to re-turn ON the
power switch when one or more
seconds have passed after turn-
ing it OFF. If the power switch is
re-turned ON immediately after
turning it OFF, the sewing ma-
chine may fail to operate normally.
In such a case, be sure to turn ON
the power switch again properly.
2) To move the setting No. forward,
switch ❹ . To move the
press
setting No. backward, press
switch ❸ .
(Caution) If the setting No. is moved
forward (or backward), the pre-
vious (or subsequent) content of
the setting is confirmed. Be care-
ful when the content of a setting
is changed (when the
switch is touched).
Example) Changing the maximum num-
ber of revolutions (setting No. 96)
switch ❸ or
Press
❹ to call setting No. "96."
The current set value is displayed
on indicator Ⓑ .
switch ❺ to change the
Press
setting to "2500."
switch ❸ or
switch ❹ to confirm the up-
/
switch
switch ❺ and

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents