4. Attaching the connecting rod
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and a lapse of 5 minutes or more.
❷
❸
❶
B
A
Make sure that the power switch is turned OFF
and insert power supply cord coming from the
power switch into the power plug socket.
(Caution) 1. Top end of power supply cord varies
in accordance with destination or
supply voltage. Check again the sup-
ply voltage and the voltage designat-
ed on the control box when installing
the switch.
2. Be sure to prepare power plug
conformed to the safety standard.
3. Be sure to connect the ground wire
(green / yellow).
1) Fix connecting rod ❶ to installing hole B of ped-
al lever ❷ with nut ❸ .
2) Installing connecting rod ❶ to installing hole A
will lengthen the pedal depressing stroke, and
the pedal operation at a medium speed will be
easier.
– 12 –