JUKI SC-921 Instruction Manual page 24

Table 2: Mode resetting operation
Mode name
Target No. of pcs. Resets the actual number of pieces
display mode Resets the difference between target num-
[F100] ber of pieces and actual number of pieces
Target/actual No. of Resets the actual number of pieces
pcs. difference dis- Resets the difference between target num-
play mode [F200] ber of pieces and actual number of pieces
Sewing machine Resets average availability rate of sewing
availability rate dis- machine
play mode [F300]
Pitch time display Resets average pitch time
mode [F400]
Average number of Resets average number of revolutions of
revolutions display sewing machine.
mode [F500]
Bobbin counter Resets the bobbin counter value
display mode (Note that only the bobbin counter is imme-
diately reset by pressing
[Detailed setting of production volume management function [F101], [F102]]
❶
❸ ❹
❷
The number of times of thread trimming for sewing one piece of garment can be set by pressing
❺ or switch ❻ in the setting state of the number of times of thread trimming [F101].
It is possible to set whether the buzzer sounds or not when the actual number of pieces has reached the
target volume by pressing
buzzer [F102].
switch ❺ (held pressed for 2 seconds)
switch ❺ .)
❺
❻ ❼
Ⓔ
switch ❺ or switch ❻ in the setting state of the target achievement
– 22 –
switch ❺ (held pressed for 4 seconds)
-
-
Resets average availability rate of sewing ma-
chine.
Resets average pitch time.
Resets average number of revolutions of sew-
ing machine.
Resets average availability rate of sewing ma-
chine.
Resets average pitch time.
Resets average number of revolutions of sew-
ing machine.
Resets average availability rate of sewing ma-
chine.
Resets average pitch time.
Resets average number of revolutions of sew-
ing machine.
-
switch ❼ is held pressed
When
(for three seconds) under the target
No. of pcs. display mode [F100] or the
target/actual No. of pcs. difference dis-
play mode [F200], the detailed setting
of the production volume management
function can be carried out.
The setting state of the number of
times of thread trimming [F101] and
that of the target achievement buzzer
[F102] can be changed over by press-
switch ❸ or
ing
switch ❹ .
switch