Seat Removal - Polaris 500 2X4 User Manual

Polaris industries automobile user manual
Hide thumbs Also See for 500 2X4:
Table of Contents

Advertisement

Seat Removal

Pull up on the front of the seat
and slide it toward the front of
the vehicle.
Install the seat by sliding the
tabs into the rear of the seat
base. Push down firmly on the
front of the seat until the pins
are fully seated into the
grommets.
Seat Belts
The RANGER is equipped with
lap-style seat belts for the operator
and passenger.
WARNING
Falling from a moving vehicle could result in serious injury or
death. Always fasten your seat belt securely before operating or
riding in the RANGER.
Passengers under five years of age require special restraints,
which are not available with this vehicle. No person under the age
of five years may ride in the RANGER.
To wear the seat belt properly, follow this procedure:
1. Place the belt across your lap as low on your hips as possible,
taking care that the belt is not twisted.
2. Push the latch plate into the buckle until it clicks.
3. Release the strap, it will self tighten.
NOTE:
The center belt must be tightened manually by pulling on the
strap.
To unfasten, press the square red button in the buckle's center.
FEATURES AND CONTROLS
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents