Specifications - Hartke Bass Attack 2 Owner's Manual

Specifications

Input Impedance
Output Impedance
Level
Tone Controls
Shape
Direct Output IN/OUT {Switch}
LIFT/GROUND {Switch}
Power {in jack}
Batteries
At Hartke, we are continually improving our products, therefore specifications and images are subject to change without notice.
1 Meg Ohm
OUT: Unbalanced 1k Ohm
Direct Out: Balanced 400 Ohm
Parallel Out: same as Input Source
+6dB to –24dB
Bass: +/- 15dB, 30 Hz
Treble: +/- 18dB, 20kHz
Contour {Switch}: Fixed Mid Scoop Curve
Frequency: 200Hz to 800Hz
Amount: +15/-25dB
IN: Parallel Input jack, OUT: Parallel Output jack
Isolates the Input and Direct Output signal grounds
9VDC center negative
2x AA – internal up-converter to generate 9v
EN
FR
DE
ES
IT