GE GFWS1700H Technical Service Manual page 12

Washer Features
9
10
(depending on
model)
11
(depending on
model)
Time Saver (on some models)
Use this option to reduce the overall
wash cycle by at least 20% without
feature is available on all cycles except
Basket Clean, Sanitize, Rinse + Spin,
and Quick Wash.
This option will modify the wash cycle,
slightly raising the wash temperature
and using more water to deliver equal
wash performance as the basic cycle.
All other features, such as Extra Rinse,
Add Steam, etc., can be used with Time
Saver but may adjust the total wash
time.
Delay Wash
Delay the start of a wash cycle for up
to 24 hours. Press the Delay Wash
button to choose the amount of
time wanted to delay the start of the
wash cycle. Once the desired time is
reached, press the Start button. The
machine will count down and start
automatically at the correct time.
Extra Rinse
This option allows for an extra rinse
during a cycle to remove excess dirt
and detergent from soiled loads.
To use:
1. Turn power on and select a wash
cycle which has Time Saver as an
option.
2. Make any adjustments to Soil, Temp
and Spin as desired.
3. Press the Time Saver button to
reduce the overall wash time.
4. Press the Start/Pause button.
NOTE: If it is forgetten to fully close
the door, a reminder signal will beep
as a reminder to do so.
NOTE: If the door is opened when the
delay is counting down, the machine
will enter the pause state. The door
must be closed and the Start button
must be pressed again in order to
restart the countdown.
On models with Rinse & Spin cycle, a
drain and spin cycle can be achieved
by pressing the Extra Rinse button
until the light is no longer illuminated.
– 12 –
(Continued next page)