Emerson F-Series Installation, Operation And Maintenance Manual page 20

Section 4: Maintenance
November 2015
6.
Figure 15
7.
8.
Figure 16
17
Installation, Operation and Maintenance Manual
Remove any hex nuts and bolts securing the two halves of the body together.
Separate the two halves of the body. This may require the use of a pry bar as the
joint between the body halves is filled with sealant during assembly.
Remove the yoke from the bottom half of the torque module.
Top Body Plate
Yoke Assembly
Bottom Body
Plate
RGS011110-3 Rev. 0
Maintenance