Boss DR-01s Owner's Manual page 17

Indication Percussion sound
Metronome
n.45
Stick
n.46
Voice one
n.47
Voice two
n.48
Voice three
n.49
Voice four
n.50
Metronome beep 1
n.51
Metronome beep 2
n.52
Metronome beep 3
n.53
Ending (Cajon)
n.54
Ending (Drums)
n.55
Assigning a Favorite Number
1.
After step 1 of "Assigning
Functions to Pedals" (p 15), press
the [FAVORITE] button
The [FAVORITE] button and VARIATION [I]
[H] buttons are lit, and a favorite number is
displayed.
f01
2.
Use the VARIATION [I] [H] buttons
to select the favorite number that
you want to recall using CTL1
The selected favorite number (F.01–F.50) is
assigned to CTL1 (pedal B).
3.
Press the [L] button
Power-off the DR-01s.
The next time you turn on the power, you
can recall the favorite number that you
assigned to the pedal.
Favorite number
(blinking)
The favorite number
recalled by the pedal
is displayed.
Advanced Use (Settings)
Assigning a Break Function
The rhythm breaks (pauses) over the specified
number of measures.
1.
After step 1 of "Assigning
Functions to Pedals" (p 15), hold
down the [BEAT] button and press
the [COUNT IN] button
The VARIATION [I] [H] buttons are lit, and a
break length is displayed.
Break length (number of
b01
measures)
2.
Use the VARIATION [I] [H] buttons
to select the length that you want
to break
Indication Explanation
b.01
The rhythm breaks over the
:
specified number of measures.
b.08
3.
Press the [L] button
Power-off the DR-01s.
The next time you turn on the power,
you can use the break function that you
assigned to the pedal.
MEMO
5 The display shows "br" during the
break.
5 You can't assign the break length for
CTL1 and CTL2 individually. If you
change the break length, the same
length is specified for both CTL1 and
CTL2.
17