Section 1 - Product Overview; Hardware Overview; Leds And Buttons - D-Link mydlink DSP-W110 User Manual

Section 1 - Product Overview

1
1
WPS/Reset Button
2
ON/OFF Button
3
Status LED
4
Power LED
5 Plug
D-Link DSP-W110 User Manual

Hardware Overview

LEDs and Buttons

3
WPS
Press for one second to start the WPS connection process. The Status LED will start to blink.
Reset Press and hold for 10 seconds to reset the device back to the factory default settings.
Press to turn the device ON or OFF.
Solid Green
The device is successfully connected to your network.
Blinking Green
During the WPS process.
Blinking Orange The device is attempting to communicate with your wireless network.
Solid Red During power on/boot process or device is defective.
Solid Green The device is powered on.
will not power on, try another outlet.
Connect your appliances, lamps, and other devices to monitor.
2
4
5
2