Front Fender - Xmotos XP125T Assembly Manual

FRONT FENDER


Remove the two crate nuts and crate bolt in picture A and discard them.

Cut the rear wheel steel tie

Support the motorcycle with a suitable stand to install the front fender, front wheel and the rear
shock absorber.

Discard the crate base.

The front fender is fastened with 3 bolts.

Position the front fender between the fork legs and fasten it to the steering stem bracket with the
NOTE: Front Fender Torque - 14 ft. lbs
3 bolts provided.
ASSEMBLY
to remove the motorcycle from the crate base.
7