Xmotos XP125T Assembly Manual page 2

In order to ship XMotos vehicles as efficiently as possible, they are partially disassembled before crating.
Since some of the most commonly removed parts have a direct bearing on a vehicle's reliability and safety,
conscientious assembly and preparation becomes extremely important. This assembly manual explains step
by step procedures of the following items for the XMotos XP125T.
1. Uncrating
2. Assembly
If you have any questions about the assembly of this product, please contact:
4J INTERNATIONAL, INC. (262) 656-1956 or customerservice@4j-intl.com
This assembly manual should be considered a permanent part of the motorcycle and should
remain if it is resold.
XGroup Corporation reserves the right to make changes at any time without notice.
No part of this publication may be reproduced without written permission.
© 2017-2018 XGroup Corporation.
FOREWORD
2