Front Number Plate; Gear Shift Lever - Xmotos XP125T Assembly Manual

FRONT NUMBER PLATE

Ø Position the front number plate on to the metal bracket you previously removed.
Ø Make sure the bottom bracket holes
Ø Install the 2 bolts
NOTE: Front Number Plate Bolt Torque - 14 ft. lbs.

GEAR SHIFT LEVER


Install the gear shift lever

Make sure to position the height of the lever with the bottom part of the foot rest so shifting will be easier.

Install the fuel tank vent hose located inside the tool kit that came with the motorcycle.
NOTE: Gear Shift Bolt Torque - 9 ft. lbs.

Make sure to pump the front brake lever several times to push the brake pads up against the brake
disc before your first ride. You are now ready to go. Good Luck and Happy Riding.
on the number plate are inserted on to the plastic pins of the front fender.
with the washers on to the bracket and tighten.
on the left side of the gear shift shaft and tighten the bolt.
ASSEMBLY
10