Xmotos XP125T Assembly Manual page 6

HANDLEBAR
Remove the two bolts
Ø
Position the handlebars on top of the handlebar clamps
Ø
Before tightening the clamp bolts, position the bracket under the top triple clamp
Ø
below and install the nuts and tighten the bolts.
Make sure the handlebars are positioned correctly and evenly before final tightening of the bolts.
Ø
See illustration below
ASSEMBLY
from the front number plate bracket.
for tightening of the bolts. NOTE: Handlebar Torque - 17 ft. lbs
6
and push the bolts through.
as illustrated