Forward/Rearward Power Front
Height Adjustment: Use the front or rear part of
the switch to modify the height and/or angle
of the seat cushion.
Forward/Backward Push the switch forward to
or backward to move the seat in the corre-
sponding direction.
Backrest Power Front
Angle Adjustment: Use the top part of the
switch to modify the angle of the seatback.
Power Lumbar — If Equipped
Vehicles equipped with power driver or pas-
senger seats may also be equipped with
power lumbar. The power lumbar switch is
located on the outboard side of the power
seat. Push the switch forward to increase the
lumbar support. Push the switch rearward to
decrease the lumbar support. Pushing up-
ward or downward on the switch will raise and
lower the position of the support.
28
Power Lumbar Switch
Manual Adjustment Rear
Forward/Rearward Manual Rear
Either side of the rear seat can be lowered to
allow for extended cargo space and still main-
tain some rear seating room.
NOTE:
Be sure that the front seats are fully upright
and positioned forward. This will allow the
rear seatback to fold down easily.
1. Pull upward on the release lever to release
the seat.
Rear Seat Release Lever
NOTE:
• Do not fold the 60% rear seat down
with the left outboard or rear center
seat belt buckled.
• Do not fold the 40% rear seat down with
the right outboard seat belt buckled.
2. Fold the rear seat completely forward.