Controls & Connections
Self-Test before Connecting
After the Battery is charged and media is loaded, and before
connecting the printer to a computer or a portable data terminal,
perform a printer self-test label to verify if printer works properly:
Printing a Self-Test Label
Press the Power Switch to turn off the printer.
Make sure the Battery is installed, and media is loaded.
Press and hold the Feed Button, and then press the Power
Switch to turn on the printer.
After printer starts to print, release the Feed Button.
Wait until printer finishes printing, press the Power Switch or
Feed Button to resume the normal printing mode.
Note: To know more about info on self-test printouts, check
Page 30. Troubleshooting – Printing a Configuration Report
AME-2230B & AME-3230B User's Manual
23
Printer Controls and Indicators
The printer's controls and indicators are shown in the diagram below:
Communication
LED
Power Switch
Feed Button
Feed Button:
1. Pressing this button during printing will make printer pause.
2. To feed a blank label.
Power Switch: Turn ON/OFF the printer.
AME-2230B & AME-3230B User's Manual
Media LED
Power LED
Battery LED
24