Lexus OM48A84U Owner's Manual page 388

SETUP
D
Changing the Bluetoothr settings
You can change the Bluetoothr set-
tings according to the following proce-
dures.
Changing the handsfree power
The "Handsfree Power" display shows
the following state.
When "Handsfree Power" is "On":
The Bluetoothr phone is automatically
connected when the "POWER" switch is
turned to ACCESSORY or ON mode.
When "Handsfree Power" is "Off":
The Bluetoothr phone is disconnected,
and the system will not connect to it next
time.
You can select the state of "Handsfree
Power".
On: The auto connection is turned on.
Off: The auto connection is turned off.
You can not change the state from "On"
into "Off" while driving.
390
1. Select "Handsfree Power".
2. Select "On" or "Off".