D
Current position/tire change cal-
ibration
The current vehicle position mark can be
adjusted manually. Miscalculation of the
distance caused by tire replacement can
also be adjusted.
1. Push the "MENU" button and select
"Setup".
2. Select "Navi." on the "Setup"
screen.
3. Select "Detailed Navi. Settings" on
the "Navigation Settings" screen.
4. Select "Calibration".
5. Select the desired button.
INFORMATION
For additional information on the ac-
curacy of a current vehicle position,
see "Limitations of the navigation
system" on page 415.
POSITION/DIRECTION CALIBRATION
When driving, the current vehicle position
mark will be automatically corrected by
GPS signals. If GPS reception is poor due
to location, you can manually adjust the
current vehicle position mark.
1. Select "Position / Direction".
2. Select the 8 directional button to
move the cursor
to the desired point
on the map.
3. Select "OK".
SETUP
355