(a) Registering areas to avoid
1. Push the "MENU" button and select
"Setup".
2. Select "Navi." on the "Setup"
screen.
3. Select "Areas to Avoid" on the "Nav-
igation Settings" screen.
4. Select "New".
5. Enter the location in the same way
as for a destination search, or display
the map of the area to be avoided. (See
"Destination search" on page 66.)
NAVIGATION SYSTEM: MEMORY POINTS
6. Scroll the map to the desired point.
"Adjust Location": To adjust the position
in smaller increments.
7. Select "Enter".
8. Select either
change the size of the area to be
avoided.
9. Select "OK".
INFORMATION
D If a destination is input in the area
to avoid or the route calculation
cannot be made without running
through the area to avoid, a route
passing through the area to be
avoided may be shown.
D Up to 10 locations can be regis-
tered as points/areas to avoid.
or
to
127