Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Analytic Systems BCH10W
Summary of Contents for Analytic Systems BCH10W
- Page 1 INSTALLATION & OPERATION MANUAL BCH10W & BCH10Y BATTERY CHARGER...
-
Page 2: Battery Safety
IMPORTANT & SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for the battery charger. BATTERY CHARGER PRECAUTIONS 1. Do not expose the battery charger to rain or snow unless it is a sealed model. 2. - Page 3 Medical Equipment Notice Analytic Systems does not recommend the use of their products in life support pplications where failure or malfunction of this product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness.
- Page 4 • Table of Contents • Description/Overview of product • Main Parts • Operation instructions • Mounting Instructions • Connection instructions • Options • Faults • Specifications • Warranty Copyright (2005-2016) Analytic Systems Ware (1993) Ltd. Revised - September 29, 2016...
- Page 5 Introduction The BCH10W Step Down series of Battery Chargers supply up to 10 amps of charging current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC in an IP66 rated watertight and EMC shielded enclosure for use in automotive, heavy equipment, marine, industrial, rail or alternative energy environments.
-
Page 6: Main Parts
Main Parts Front Panel 1. Deutsch DT04-4P Input/Output connector on pigtail 2. Input Power Good LED 3. Charging LED... -
Page 7: Operation
Operation To turn the unit on, simply turn on your source of power. The Input Power LED will illuminate to indicate the presence of input power. The BCH10 will immediately begin charging the battery. When the unit is first turned on, it will charge the batteries at a constant current and the charging light will be on. -
Page 8: Installation
Installation Mounting Mount the unit and allow at least 1 inch 5.91 of clearance for adequate cooling. Input and Output Connections 0.21 This unit is equipped with a watertight gland and short 4 conductor pigtail terminated with 2.15 a Deutsch DT04-4P connector. The mating 4.64 7.0±1.0 connector is also supplied, but without... -
Page 9: Troubleshooting
ROHS (European) Option (E Option) Consistent with military standards, this unit is normally manufactured using lead based solder. However, this unit can be built to ROHS lead free standards, identified internally by a red colored printed circuit board by adding the E option. This is a no charge option, but can add 2-4 weeks to the delivery of an order. -
Page 10: Specifications
Specifications Input Voltages MODEL BCH10W(Y)-12 BCH10W(Y)-24 BCH10W(Y)-32 BCH10W(Y)-36 BBCH10W(Y)-48 Input Volts 20 - 80 VDC 30 - 80 VDC 40 - 80 VDC 45 - 80 VDC 60 - 80 VDC Output Voltages Output Volts Nominal 12 VDC 24 VDC... -
Page 11: Limited Warranty
2 Years from date of manufacture for non-standard or OEM products 1 Year from date of manufacture for encapsulated products. 3. Analytic Systems will determine eligibility for warranty from the date of purchase shown on the warranty card when returned within 30 days, or... - Page 12 DESIGNED AND MANUFACTURED BY 800-668-3884 604-946-9983 sales@analyticsystems.com www.AnalyticSystems.com Battery Chargers • Inverters • Power Supplies • Voltage Converters 8128 River Way Delta, BC V4G 1K5 | Canada...
Need help?
Do you have a question about the BCH10W and is the answer not in the manual?
Questions and answers