ABB S900 Manual page 4

I/O System S900
Communication Interface for PROFIBUS DP, CI920
NOTICE
The information in this document is subject to change without notice and
should not be construed as a commitment by ABB. ABB assumes no
responsibility for any errors that may appear in this document.
In no event shall ABB liable for direct, indirect, special, incidental or
consequential damages of any nature or kind arising from the use of this
document, nor shall ABB be liable for incidental or consequential damages
arising from use of any software or hard-ware described in this document.
This document and parts thereof must not be reproduced or copied without
written per-mission from ABB, and the contents thereof must not be imparted
to a third party nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a
license and may be used, copied, or disclosed only in accordance with the
terms of such license.
Copyright © 2001 ABB
All rights reserved.
Release:
Document number:
CE MARKING
This product meets the requirements specified in EMC Directive 89/336/EEC
and in Low Voltage Directive 73/23/EEC.
TRADEMARKS
Registrations and trademarks used in this document include:
Windows
ActiveX
Industrial IT
HART
4
October 2002
3BDD010422R0101 Rev. A
Registered trademark of Microsoft Corporation.
Registered trademark of Microsoft Corporation.
Trademark of ABB.
HART Foundation
3BDD010422R0101