Table of Contents
Advertisement
FlashLight： ： ： ：
Tap " ON" and check if the flash light is on.
Tap " OFF" and check if the flash light is off.
You can judge the result based on the test result.
G sensor： ： ： ：
Tap "Start" to start test.
Test 6 direction and 5 seconds per direction.
Test sequence：Z(put flat, LCM face up)
90 degree clockwise)
clockwise)
Tool judges test pass or fail automatically.
Chapter 5
-Y(Turn S520 90 degree clockwise)
-Z(Turn S520 90 degree clockwise and LCM face down).
Y(put plumb, LCM face to tester)
-X(Turn S520
X(Turn S520 90 degree
39
Advertisement
Table of Contents
