General Information
Pre-disassembly Instructions
IMPORTANT: Before proceeding with the disassembly procedure, make sure that you do the following:
1.
Turns of the power to the system.
2.
Unplugs the USB adaptor and all other cables from the system.
3.
Covers the work area with a clean, dry, lint-free cloth to protect the LCD panel.
4.
Places the system on a flat, stable surface.
Disassembly Process
The disassembly process is divided into the following sections:
External component disassembly
Main unit disassembly
The following flowcharts provided in succeeding disassembly sections illustrate the entire disassembly sequence. Observe the order of
the sequence to avoid damage to any of the hardware components.
NOTE: Torque is 0.9±0.1kgf/mm and driver speed is lower than 750 rpm
1.
Show the instruments:
2.
Push away down and open the battery cover.
Chapter 5
18