Yamaha MMP1 Operation Manual page 24

4-1-7b. Output Patch
Dante Out For selecting the audio signal output from the Dante [PRIMARY]/[SECONDARY] connectors on the MMP1.
Analog Out For selecting the audio signal output from the ANALOG [OUTPUT 1-8] connectors on the MMP1.
AES/EBU Out For selecting the audio signal output from the [AES/EBU 1-8]/[AES/EBU 9-16] connectors on the MMP1.
Refer to the table on page 25 for more information about audio signals that can be assigned.
NOTE
While holding down the right mouse button (Windows) or the <control> key (Mac) on the Source fields, drag up or down on the fields to
select several input sources at the same time.
4. Screens
MMP1 Operation Manual 24