F-60
AUXILIARY STATOR REMOVAL AND REPLACEMENT (continued)
AUXILIARY
STATOR
PROCEDURE
1. Turn machine off.
2. Perform the Case Cover Removal Procedure.
3. Perform the Welder Separation Procedure.
4. Locate the Auxiliary Stator. See Figure F.31.
5. Using a 1/2" wrench, remove the eight bolts
securing the two cowlings to the Auxiliary
Stator. See Figure F.32.
6. Using a 3/8" wrench, remove the two screws
securing the brush holder assembly.
Figure F.33.
7. Using a 1/2" wrench, remove the four thru bolts
securing the Auxiliary Stator to the main stator.
See Figure F.34.
8. Remove the Auxiliary Stator.
TROUBLESHOOTING AND REPAIR
FIGURE F.31 – EXCITOR STATOR LOCATION
MACHINE
FRONT
See
BIG RED
®
500/600
F-60
MACHINE RIGHT
SIDE VIEW