Onkyo HT-R410 Service Manual page 6

Rear panel
1
VIDEO 3
DIGITAL INPUT
OPTICAL COAXIAL REMOTE
CONTROL
IN
IN OUT IN IN
L
SUBWOOFER
PRE OUT
R
CD TAPE
VIDEO 3
6 7 8 9
1
z REMOTE CONTROL
Connect the Onkyo components that have z connectors such as a
CD player, and cassette tape deck using the z cables provided
with them. When these components are interconnected, they can be
controlled from the remote controller provided with the
HT-R410.
For correct operation, the audio connection cables must also be
connected. This applies to both remote and standard operation.
2
ANTENNA
These terminals are for connecting the FM antenna and AM
antenna.
3
FRONT SPEAKERS B
These terminals are for connecting the speaker system B.
4
FRONT SPEAKERS A, CENTER SPEAKER
and SURROUND SPEAKERS
These terminals are for connecting the speaker system A, including
the center and surround speakers.
5
AC OUTLET
The HT-R410 is supplied with AC outlet for connecting the power
cord from other devices so that their power is supplied through the
HT-R410. By doing this, you can use the STANDBY/ON button on
the HT-R410 to turn on and off the connected devices as well.
6
DIGITAL INPUT OPTICAL, COAXIAL
These are digital audio inputs. There is 1 optical jack and 1 coaxial
jack. The inputs accept digital audio signals from DVD, LD, CD, or
other digital source.
7
SUBWOOFER PRE OUT
This terminal is for connecting an active subwoofer.
2
FM
AM
75 ANTENNA
VIDEO 2 VIDEO 1 DVD MONITOR
OUT
IN OUT IN IN
S VIDEO
IN OUT IN IN
VIDEO
IN OUT IN FRONT SURR CENTER
L
R
SUB
VIDEO 1
VIDEO 2
WOOFER
DVD
p q w
3 4
FRONT FRONT CENTER SURROUND
SPEAKERS B SPEAKERS A SPEAKER SPEAKERS
R L R L R
8
CD IN
Connect the output terminal on the CD player to the CD IN L/R
jacks on the HT-R410.
9
TAPE IN/OUT
Connect the output terminals (PLAY) of the cassette tape deck or
MD recorder to the TAPE IN L/R jacks on the HT-R410 and the
input terminals (REC) to the TAPE OUT L/R jacks.
p
VIDEO 1 IN/OUT, VIDEO 2 IN, VIDEO 3 IN
Connect the output terminals (PLAY) of the video cassette recorder
to the VIDEO 1 IN L/R jacks on the HT-R410 and the input
terminals (REC) to the VIDEO 1 OUT jacks.
Connect the output terminals of the video cassette player or satellite
tuner to the VIDEO 2 IN or VIDEO 3 IN jacks on the HT-R410.
q
DVD
Connect the DVD player. If the DVD player has 5.1 channel output
terminals, connect each terminal to the FRONT L/R, CENTER,
SUBWOOFER, and SURR L/R terminals on the HT-R410. If the
DVD player has only 2 channel output terminals, connect to the
FRONT L/R terminals on the HT-R410.
w
MONITOR OUT
The monitor output includes both RCA type and S video
configurations. This output is for connecting television monitors or
projectors.
Tip
The audio input jacks of the HT-R410 do not accept direct
connection of an analog turnable.
If you want to connect a turntable to the HT-R410 prepare a phono
equalizer and connect it to the unused audio input jacks (IN L/R).
Refer to the instruction manuals of the phono equalizer and
turntable for details.
HT-R410
5
AC OUTLET
L