Advertisement
Installation Procedure
Even if you set the Use of drain pump (SEG8) option to 0, it is automatically set to 2 (the drain pump is used with 3
minute delay).
If you set the Maximum filter usage time (SEG18) option to a value other than 2 and 6, it is automatically set to 2
(1000 hours).
If you set the Individual control with remote control (SEG20) option to a value other than 0 to 4, it is automatically
set to 0 (Indoor 1).
Default value of Heating setting compensation (SEG21) is 5°C for 360 cassette model.
* Level control: The centralized controller can limit the functions and inputs of connected products with this
function enabled. (Example: Operation mode limit (Cooling only/Heating only/No limitation), Heating
temperature upper limit, Cooling temperature lower limit)
To enable 'Level control' when applying the DPM with the centralized controller, appoint the master
(Set 'Use of external control [SEG14] option to 4 or higher).
Example: When installing DPM (1 Outdoor unit with 4 indoor units)
Condition
External control
Default
Disuse
Use (Indoor 3)
Use (Indoor 4)
Changing the addresses and options individually
When you want to change the value of a specific option, refer to the following table and follow the steps in Common
steps for setting the addresses and options on page 20.
Option
SEG1
Function
Page
Indication
Details
Indication
and
0
details
Example: Changing the Buzzer control (SEG17) option of the installation options to 1 disuse.
Option
SEG1
Function
Page
Indication
0
28
English
Level control
Indoor 1
Use
4
Disuse
Not set (0)
Use
Not set (0)
SEG2
Option mode to
Mode
Indication
Details
Indication
Option
D
type
SEG2
Option mode to
Mode
D
SEG14 Setting
Indoor 2
Indoor 3
Not set (0)
Not set (0)
Not set (0)
Not set (0)
1~3
Not set (0)
Not set (0)
SEG3
SEG4
Tens position
of the option
change
number
Details
Indication
Details
Tens
0 to F
position
0 to 9
value
SEG3
SEG4
Tens position
of the option
change
number
2
1
Result
Indoor 4
Slave (All)
Master (Indoor 1), Slave
Not set (0)
(Indoor 2,3,4)
Not set (0)
Slave (All)
Master (Indoor 4), Slave
5~7
(Indoor 1,2,3)
SEG5
Units position
of the option
New value
number
Indication
Details
Indication
Units
New
position
0 to 9
value
value
SEG5
Units position
of the option
New value
number
7
SEG6
Details
0 to F
SEG6
1
Advertisement
