Service Recommendations; Ec Declaration Of Conformity - Flymo EasiCut 500CT Original Instructions Manual

1. We strongly recommend that your product is serv-
iced at least every twelve months, more often in a
professional application.
2. Always use genuine Husqvarna Spare Parts.
3. Prepacked spares are available from most Husq-
varna UK Ltd. stockists.
4. Your product is uniquely identified by a silver and
black product rating label
5. If you have a problem with your machine contact
your local Approved Service Centre ensuring you
have full details of your product as described on
the product rating label.
Husqvarna AB, S-561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designation..............................Hedge Trimmer
Designation of Type(s) ............ECC500
Identification of Series..............See Product Rating Label
Year of Construction.................See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN60745-1, EN60745-2-15, EN50366, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
in the table.
The maximum hand / arm vibration weighted value a
product(s) is given in the table.
The declared vibration total value has been measured in accordance with a standard test method and may be used for
comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
The vibration emission during actual use of the power tool can differ from the declared total value depending on the
ways in which the tool is used.
Operators should identify safety measures to protect themselves that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger time).
2000/14/EC: The Measured Sound Power L
Conformity Assessment Procedure...............
Notified Body.................................................
Newton Aycliffe 07/02/2013
P . Lameli
Global R&D Director - Hand held
Keeper of technical documentation
Type
Blade length (cm)
Measured Sound Power L
Guaranteed Sound Power L
Sound pressure L
Uncertainty K
Hand / arm vibration a
Uncertainty K
Weight (Kg)
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2013 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
5052865-02

Service Recommendations

EC Declaration of Conformity

at the work station, measured according to EN60745-2-15 is given
pA
measured according to EN60745-2-15, on a sample of the above
h
& Guaranteed Sound Power L
WA
Annex V
Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
(dB(A))
WA
(dB(A))
WA
(dB(A))
pA
(dB(A))
pA
(m/s 2 )
h
(m/s 2 )
ah
of Flymo S.A.
Husqvarna AB
S-561 82
Huskvarna
Sweden
6. Should it be necessary for work to be carried out by your
Service Centre, it is important to take your complete
machine including cable and any extension cables used.
A network of specialist dealers can be found in your local
Yellow Pages. To obtain service on your product simply
telephone or visit your local Service Centre. Should you
require service under the terms of our guarantee the
Service Centre will require proof of purchase.
All of the centres listed stock genuine Husqvarna
Spare Parts.
NOTE: Our Service Repairers act on their own behalf
and are not empowered to commit or legally bind
Husqvarna UK Ltd. in any manner whatsoever.
values are according to the tabulated figures.
WA
ECC500
101
1.11
50
93
82
2.5
1.5
3.2