Repair Instruction; Electrical Diagram - Philips SmallStar FC8230/01 Service Manual

DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- First remove the dust bag.
- Remove the dustcover using a screwdriver (see picture).
- Remove the Cord Winder Button by pulling it upwards
(see picture).

ELECTRICAL DIAGRAM

SPEED
CONTROL UNIT
M
C
B
A
CORD WINDER
- When the dustcover and the cord winder button have been
removed, the 5 screws A
disassemble the upper housing, are accessible (see picture).
A
A
A
A
- To disassemble the cord winder, use TORX screwdriver no.
T10, which is one of a set consisting of T20; T15; T10;
T9; T8; T7 and T6 (code number 4822 395 50145).
- During re-assembling, take care the wires are positioned in
the guides correctly.

REPAIR INSTRUCTION

- The spare parts have been standardized as much as possible.
- The cord winder spring must be tensioned to the maximum
level and then be rewound approx. 1.5 turn.
- Item 6, air valve, opens to cool the motor if the air
displacement is too low or if the airfl ow is blocked.
FC8230/01
that need to be unscrewed to
A
2-7