E-Tech DrivE-Tech 015 Installing And Operating Manual page 23

Autorestart
ON/OFF
Periodic autorun
t = XX [h]
AN1,AN2 function
XXXXXX
Offset input 1
x = XX.X [%]
Offset input 2
x = XX.X [%]
Offset input 3
x = XX.X [%]
Offset input 4
x = XX.X [%]
Change PASSWORD2
ENT
OFF If ON is selected, after a lack of voltage, DrivE-Tech returns to its normal
status; if DrivE-Tech was powering the pump before the voltage drop, it
resumes powering the pump automatically.
Warning, review the advice in chapter 1.
0 Pump periodic autorun after XX hours of inactivity. Value 0 makes
function disabled.
Warning, review the advice in chapter 1.
Function logic for analog input AN1,AN2.
Indipendent
Zero correction for analog input 1
(20 mA x 20% = 4 mA).
20%
Zero correction for analog input 2
(20 mA x 20% = 4 mA).
20%
Zero correction for analog input 3
(20 mA x 20% = 4 mA).
20%
Zero correction for analog input 4 (default 0-10V)
(10V x 00% = 0 V).
00%
Pressing ENT allows the advanced level password (2st level) (default 002)
to be changed.
23